Correct installation and debugging matters whether the buckwheat hulling machine can have a good performance in operation. First, let’s learn how to install the buckwheat hulling machine.
1. Confirm the buckwheat hulling machine installation location according to the work place condition.
2. Check the connecting bolts and nuts of each part. If they are loose, screw up in time.
3. The BUCKWHEAT HULLING MACHINE should be installed firm and revised horizontally.
4. Adjust the motor’s installation location and the triangle belt tightness degree.
5. Connect the power supply according to the power utilization demand.
 

Then, let’s learn about buckwheat hulling machine debugging methods.
1. Switch on and have an idling running test. Check whether the motor’s revolving direction is correct.
2. Check whether each part’s joint is firm enough. The buckwheat hulling machine should have no any shaking and have stable running.
3. Turn the gap adjustment disc and the rotation should be flexible.
4. When all of the factors above are normal, then we can begin to operate the buckwheat hulling machine.